Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to remove the rear light of a Renault Clio 4.

Renault Clio - Video tutorial

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years 2012-2019
Part: Tail light
Operation: How to remove the rear light of a Renault Clio 4.

To disassemble the rear light of a Renault Clio 4, some simple steps are required to be performed correctly to carry out the operation without damaging our car. Let's see what they are. To start we will have to raise the hood; this will allow us to act on the two screws, as shown at minute 0:25. After unscrewing them, we extract the plastic support. Now we can extract, by pulling it towards us, the whole piece of the rear light. We then disconnect the cables that connect it to the car's electrical system. At this point, the removal of the rear light will be completed.


Posted on 25 June 2022 by ScegliAuto



How to disassemble the rear headlight of the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Disassembling the rear light of your Renault Clio Mk3 is very simple and to complete the operation you just need to follow a few simple steps. Let's
How to reset the "Service" light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before we can begin, we will have to sit in the driver's seat of our Renault Clio. Let's start by activating the instrumentation of our Renault Clio.
How to replace the rear light bulb on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In today's video tutorial we will see how to remove and replace the rear light bulbs of the Renault Clio, following the instructions below. First of

    Frequently Asked Questions

    • Clio 1998-2005 - What caused the Renault Clio rear light problem? Read Answer
    • Clio 2012-2019 - How to replace the rear light of Renault Clio? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos