Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Rear Stop Light on Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Tail light

Do you want to remove the rear light of the Renault Clio? Here’s how to do it from inside the rear of the car. Open and lift the boot, then locate the securing screws at the top of the light. Unscrew the securing screws located at the side of the light. Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the bulbs if they are damaged (same size and voltage). Secure the new light in the car's bodywork. Test the operation of the bulbs fitted in the new rear light.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light on a Renault Clio
How to Replace the Third Brake Light on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video guide, see how to remove the third brake light on a Renault Clio. Lift the car on a column lift, and using a screwdriver, detach the me…
How to Remove the Rear Light on Renault Clio 4
How to Remove the Rear Light on Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Open the boot and remove the two small screws that secure the rear light support, as shown in the video. At this point, you can detach the housing. B…
How to disassemble the rear headlight of the Renault Clio 3
How to disassemble the rear headlight of the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Disassembling the rear light of your Renault Clio Mk3 is very simple and to complete the operation you just need to follow a few simple steps. Let's …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos