Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Twingo?

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on the Renault Twingo 2 is an extremely simple and quick operation. Before proceeding, ensure that all scheduled maintenance work has been completed.

Start by inserting the key and turning on the instrument cluster, then repeatedly press the button at the end of the windscreen wiper control lever until you reach the screen displaying a spanner. Once done, hold the same button for about 20 seconds, or until the service light goes out completely.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Twingo?
How to Reset the Service Light on a Renault Twingo?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To reset the service light on a Renault Twingo, turn on the ignition by rotating the key in the ignition switch: once it is on, scroll through the me…
How to Reset the Service Light on a Renault Twingo?
How to Reset the Service Light on a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) Reset the Service light on a Renault Twingo by inserting the key to turn on the instrument cluster. Once the cluster is on, press the button located …
How to reset the Service light on the Renault Twingo?
How to reset the Service light on the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) To reset the Service light on the Renault Twingo, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit, scroll …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos