Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace low beam bulbs in Renault Kwid?

Model: Renault Kwid MK 1 - Years 2015-2024
Part: Headlight bulb

In this tutorial we can see how to replace the low beam bulbs in the Renault Kwid, a very simple and fast operation. Before doing this, let's make sure that the key is not inserted in order to operate safely. We start by opening the bonnet, then disconnect the large black connector on the back of the headlight and remove the circular rubber cover. Once this is done, unhook the metal clip of the bulb as shown in the video, then extract it from the lighthouse and insert the spare one, avoiding touching it directly with your bare hands. Finally, reinsert the cap and reconnect the connector.

Posted on 27 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights in the Renault Kwid?
How to replace the rear lights in the Renault Kwid?
Renault Kwid (2015-2024 / MK 1) In this tutorial we can see how to replace the rear lights on the Renault Kwid, an extremely simple and quick operation. First of all, make sure that…
How to replace the rear lights in the Renault Kwid?
How to replace the rear lights in the Renault Kwid?
Renault Kwid (2015-2024 / MK 1) In this tutorial we can see how to replace the rear lights in the Renault Kwid, a very simple and fast operation. Before proceeding, make sure that t…
Where are the fuses on the Renault Kwid located?
Where are the fuses on the Renault Kwid located?
Renault Kwid (2015-2024 / MK 1) The Renault Kwid fuses are contained inside the single fuse box installed on the car: in this model it is possible to identify the box inside the pas…

Other guides you may be interested in

How to Open the Bonnet of the Ford Transit Custom

On many Ford vehicles, opening the bonnet is not done using the traditional lever located in the cabin, at the bottom left on the driver's side. Instead, you must use the ignition key to unlock a lock positioned at the front of the vehicle, usually beneath the manufacturer's badge. The reason for this choice is unclear, but it can pose a difficulty if the lock becomes jammed, risking damage to the key. You can try to disengage the lock by inserting a long screwdriver through the grille of the front panel. Once the first opening is achieved, spray some unlocking fluid on the lock to allow subsequent activation with the key.

Watch the video!


by ScegliAuto

More videos