Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs on a Renault Megane

Model: Renault Megane Megane IV, Megane 4 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight

See other generations:
Video tutorial

Today, we will show you how to quickly and easily replace the front headlight bulbs on a Renault Megane model 4. Start by replacing the dipped beam bulb. Remove the cover from the grille side.

Grip the base with your fingers and rotate the bulb outward; detach the bulb from the connector using a wiggling motion. Insert the new bulb into the connector and place it back into the headlight.

To replace the main beam bulb, remove the grille cover, grip the plastic cover, and pull a bulb from the base while disconnecting the connector. Insert the bulb into the headlight until you hear a click, then reconnect the connector and close the grille cover.


Posted on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Replace the front headlight bulbs on a Renault Megane: Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and s…
Replacing the Front Headlight Bulb on a Renault Megane
Replacing the Front Headlight Bulb on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) .. Let’s see how to replace the front headlight bulbs on a Renault Megane. Lift the bonnet by pulling the lever located a.. …
How to Change the Front Lights on Renault Megane
How to Change the Front Lights on Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Do you want to replace the damaged bulbs inside the front headlight? Here’s how to remove the headlight from a Megane and replace the damaged bulbs. …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos