Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Lights on a Renault Kwid?

Model: Renault Kwid MK 1 - Years 2015-2024
Part: Tail light

In this tutorial, you will see how to replace the tail lights on a Renault Kwid, a very simple and quick operation. Before proceeding, ensure that the key is not in the ignition for safety. Start by opening the trunk lid, then remove the two bolts located along the inner edge of the light assembly to be replaced. Once done, grasp it, pull it towards you, and disengage it from the body. At this point, you can remove the old bulbs by turning them counterclockwise, insert them into the replacement light, and reassemble everything by following the reverse procedure.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Battery in a Renault Kwid
How to Change the Battery in a Renault Kwid
Renault Kwid (2015-2024 / MK 1) If you own a Renault Kwid and need to replace the vehicle's battery, follow this guide step by step. First, park your Renault Kwid safely and turn it…
Where to Find the Fuses in the Renault Kwid
Renault Kwid (2015-2024 / MK 1) Locating the fuses in your Renault Kwid is very simple. Just follow the procedure described in this guide. Before you start, for safety reasons, turn…
Where to Find the Fuse Box in the Renault Kwid
Where to Find the Fuse Box in the Renault Kwid
Renault Kwid (2015-2024 / MK 1) In this guide, find the steps to locate the fuse box in your Renault Kwid. Once you have safely parked the vehicle and completely turned it off, go t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos