Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight of the Renault Kwid

Model: Renault Kwid MK 1 - Years 2015-2024
Part: Tail light

If the rear light of your Renault Kwid is damaged and you want to replace it with a new one, all you have to do is carefully read the following guide and follow the steps described. First of all, reach the rear area of the vehicle and lift the hood, then use a specific key to unscrew the screws located around the light. Once all the screws are unscrewed, pull the light towards you and disconnect the electrical cable. Finally, mount the new rear light following the reverse order of the steps performed earlier. Personally test the functioning of the light and you are done.

Posted on 20 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tail Lights on a Renault Kwid?
How to Replace the Tail Lights on a Renault Kwid?
Renault Kwid (2015-2024 / MK 1) In this tutorial, you will see how to replace the tail lights on a Renault Kwid, a very simple and quick operation. Before proceeding, ensure that th…
How to Change the Battery in a Renault Kwid
How to Change the Battery in a Renault Kwid
Renault Kwid (2015-2024 / MK 1) If you own a Renault Kwid and need to replace the vehicle's battery, follow this guide step by step. First, park your Renault Kwid safely and turn it…
Where to Find the Fuses in the Renault Kwid
Renault Kwid (2015-2024 / MK 1) Locating the fuses in your Renault Kwid is very simple. Just follow the procedure described in this guide. Before you start, for safety reasons, turn…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos