Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Climate Control Bulbs on a Renault Symbol or Clio

Model: Renault Symbol Symbol III - Years 2012-2019
Part: Checks and maintenance

As shown in the video, to change the climate control bulb, you need to remove the center panel. This will come off after unscrewing the two screws on the sides with a 20 mm wrench and disconnecting the four connectors inside (the first one to remove is the one pointing towards the center of the car). Next, unscrew the two side screws of the upper panel as seen in the video. Wiggle a bit and try to pull out the climate control element without removing the entire panel. The two bulbs you need to replace can be removed simply by twisting and pushing upward. Replace them and reassemble everything.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Center Console Light on the Renault Symbol?
How to Replace the Center Console Light on the Renault Symbol?
Renault Symbol (2012-2019 / Symbol III) If you intend to replace the light bulb of the center console in your vehicle, follow these simple instructions: gather the appropriate keys to extra…
How to Reset the Tire Pressure Light on a Renault Symbol
How to Reset the Tire Pressure Light on a Renault Symbol
Renault Symbol (2012-2019 / Symbol III) In this video tutorial, you can see how to reset the tire pressure light on a Renault Symbol by following a few simple steps. First, check the tire p…
How to Set the Clock on a Renault Symbol
How to Set the Clock on a Renault Symbol
Renault Symbol (1999-2008 / Symbol I) This brief tutorial video shows the procedure to change the time on your Renault Symbol, a first-generation model produced from 1999 to 2008. First, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos