Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Windshield wipers

Before proceeding with the replacement of the wiper blades, it is advisable to check their compatibility, comparing both the length (usually the driver’s side blade is slightly longer than the passenger side) and the type of attachment. Once you are sure of the compatibility of the replacement, lift the wiper arm, rotate the hook by 90°, press the fixing tab to retract the locking pin, pull back, and slide off the hook. Then insert the new blade, still rotated by 90°, align the fixing hook, and press it until the pin locks into place.

Updated on 13 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Rear Wiper Blade on a Renault Clio
How to Replace the Rear Wiper Blade on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before you start, exit the cabin of your Renault Clio and head to the rear window. Begin by lifting the rear wiper arm by pulling it towards you. Thi…
Replacing the Windscreen Wiper Blade
Replacing the Windscreen Wiper Blade
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Replacing the wiper blade is a simple task you can perform before the bad weather arrives, as good visibility is crucial, especially during adverse c…
How to Remove and Replace the Rear Wiper Blade on a Renault Clio
How to Remove and Replace the Rear Wiper Blade on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Learn how to remove and replace the rear wiper blade on a Renault Clio. Unscrew the securing nut of the wiper arm (where the blade is mounted). Remov…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos