Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Renault Clio?

Model: Renault Clio Clio III, MK 3, Clio 3 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Renault Clio, turn on the ignition to access the menu. Use the button located on the lever to the right of the steering wheel to navigate.

When the message showing the miles until the next service appears, press and hold the same button on the right lever for a few seconds. You will notice the message start to flash until it completely resets along with the service interval; finally, you can turn off the ignition.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Renault Clio (2012-2019 / MK 4, Clio IV, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) The Service light that appears on the instrument cluster of the Renault Clio 3 can be reset by turning on the ignition and then pressing and holding …
Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) To reset the Service light on the Renault Clio 3, turn the key to the 'on' position without starting the engine. Navigate through the menu using the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos