Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil warning light on the Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Service warning light

Resetting the service warning light on your Renault Scenic is really simple and requires just three steps. First, insert the card and press the "Start / Stop" button so that only the vehicle ignition is turned on (do not start the engine as well). Then press the button located at the right end of the steering wheel lever several times until the oil change item appears on the on-board computer display. Finally, hold the same button down for about five seconds. When finished, release it and turn off the ignition. The reset of the indicator is completed successfully.

Posted on 16 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Reset of the service warning light on Renault Scenic
Reset of the service warning light on Renault Scenic
Renault Scenic (2016-2022 / MK 4, Scenic IV, MK IV, Scenic 4) Resetting the service warning light on Renault cars in general and also on Renault Scenic is really very simple and now we will show it to you. After…
How to reset the service light on the Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) After performing an oil change on a Renault Scenic mk2 model vehicle, it is necessary to proceed with resetting the warning light. To independently r…
How to reset the Renault Scenic service light
How to reset the Renault Scenic service light
Renault Scenic (2003-2009 / MK 2, Scenic 2) In this video tutorial we will see how to reset the engine oil change light (service) of the Renault Scenic. First of all we get in the car and turn …

Other guides you may be interested in

How to Remove the Spark Plugs on a Subaru Forester

In this video, learn how to remove the spark plugs on a Subaru Forester. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the cylinder head, the air filter kit (if necessary), then disconnect the coils by hand, unscrew the spark plugs with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them properly, secure the ignition coils, refit the previously removed panel and the air filter kit. Close the engine bonnet.

Watch the video!


by ScegliAuto

More videos