Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Captur
    4. : How to disassemble the battery of the Renault Captur

Renault Captur - Video tutorial

Model: Renault Captur MK 2 - Years 2019-2024
Part: Battery
Operation: How to disassemble the battery of the Renault Captur

Leave the bonnet open, lock the car and wait about 5 minutes. Now open the hood and proceed. Remove the two plastic covers at the top, releasing the clips from their seats. Now release the ground lead with a 10 spanner. Then disconnect the positive lead. We unscrew the two screws with a cross screwdriver. We can now remove the battery from its housing. To replace it, use one of the same type (12V - 70 Ah). Let's now proceed with the reassembly, in the same way in which we disassembled the previous one. Close the hood and the operation will be finished.


Posted on 12 December 2022 by ScegliAuto



How to replace the battery of a Renault Captur key?
Renault Captur (2019-2024 / MK 2) Good morning, today's goal is to replace the battery of our Renault Captur key. Let's start by sliding down the back cover of the key. Then, we will
How to remove the battery of a Renault Captur
Renault Captur (2013-2019 / MK 1) Before we can begin, we will have to open the front hood of our Renault Captur. So let's start by unscrewing and removing the bolts that secure the b
How to replace the key battery of the Renault Captur 2
Renault Captur (2019-2024 / MK 2) If the smart key of your Renault Captur Mk2 has suddenly stopped working, you most likely need to replace the coin cell battery inside. If you do not

    Frequently Asked Questions

    • Captur 2013-2019 - What problems can the Renault Captur battery have? Read Answer
    • Captur 2013-2019 - Why does the Start & Stop function of the Renault Captur not work? Read Answer
    • Captur 2019-2025 - What problems with the battery on Renault Capture? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos