Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Clio 3

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Service warning light

In this video tutorial, learn how to reset the service light on a third-generation Renault Clio, produced from 2005 to 2013. First, insert the key and turn it to the first position to activate the instrument cluster. Wait for the notification "service due" to appear on the information display of the speedometer. Once the notification appears, press and hold the up arrow button located at the end of the right-hand steering column stalk. The message will start to flash, so continue to hold the button until it stops flashing to complete the reset.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Renault Clio 2
How to Reset the Service Light on the Renault Clio 2
Renault Clio (1998-2005 / Clio 2, MK 2) Resetting the service light on the Renault Clio 2 without using the diagnostic socket is possible, and here’s how to do it independently and for free…
How to Reset the TPMS Light on the 2020 Renault Clio
How to Reset the TPMS Light on the 2020 Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today, we will explain how to reset the tyre pressure monitoring system (TPMS) light on a 2020 Renault Clio. Turn on the vehicle's instrument panel a…
Reset Service Light Renault Clio 2014
Reset Service Light Renault Clio 2014
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To reset the service light, place the gearbox in neutral, and set the ignition to pre-start mode without actually starting the engine. Using the cont…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos