Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Renault Kangoo Service warning light?

Model: Renault Kangoo MK 2, FW, FC - Years 2007-2021
Part: Service warning light

The Renault Kangoo Service warning light is reset by inserting the ignition key in its lock, so that it can be turned to switch on the instrument panel. Once this has been turned on, it will be possible to press and hold the button located at the end of the lever to the right of the steering wheel. If you hold it down, the Service light will start flashing, until it disappears completely and the maintenance interval is reset. To verify that the reset was successful, the ignition must be switched off and on again.

Posted on 25 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Renault Kangoo Service warning light?
How do you reset the Renault Kangoo Service warning light?
Renault Kangoo (2007-2021 / MK 2, FW, FC) When the warning light on the Renault Kangoo comes on with the wrench and a flashing zero, it means that the period for carrying out the scheduled se…
How do you reset the Renault Kangoo Service warning light?
How do you reset the Renault Kangoo Service warning light?
Renault Kangoo (2007-2021 / MK 2, FW, FC) The reset operation of the Service warning light on the Renault Kangoo is carried out by inserting the key and turning it to turn on the instrument p…
How do you reset the Renault Kangoo Service warning light?
How do you reset the Renault Kangoo Service warning light?
Renault Kangoo (1997-2008 / KC, MK 1, KW) In order to reset the Renault Kangoo Service warning light, the key must be inserted to switch on the instrument panel. Once this has been switched o…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos