Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery of a Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

To replace the key battery of a Renault Kangoo, start by prising off the rear cover of the key. Find the entry point on the back of the key and use a flat, thin tool, such as a screwdriver or a coin, to gently open the cover. Once the rear cover is removed, locate the battery inside the key. Use a small cross-head screwdriver or a similar tool to carefully remove the old battery.

Make sure to remember the orientation of the old battery for installing the new one. Now, insert the new battery into the designated compartment, ensuring the correct polarity. Ensure that the battery is securely in place.

Finally, reposition the rear cover on the key and make sure it is firmly attached. Test the key to verify that it functions correctly and that the signal is transmitted to the vehicle.

Once confirmed that everything works properly, you are ready to use your Renault Kangoo again.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

Renault Kangoo (2007-2021 / MK 2, FC, FW) In this tutorial, see how to replace the battery in the Renault Kangoo ZE van, an extremely simple and quick operation. First, ensure that the key is…
Renault Kangoo (2007-2021 / MK 2, FC, FW) If you do not know how to replace the button battery inside your Renault Kangoo Mk2 key (year 2009-2020), do not worry as this guide will provide all…
Renault Kangoo (2007-2021 / MK 2, FC, FW) The key of the Renault Kangoo has a simple and minimalist exterior structure that makes it easy to change the battery inside. All you need is a commo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos