Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Renault Kangoo ZE van?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Battery

In this tutorial, we can see how to replace the battery in the Renault Kangoo ZE van, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the hood, loosen the terminal nuts with a 10mm socket wrench, and starting from the negative terminal, disconnect both. Next, unscrew the bolt of the lower fixing bracket with a long 13mm wrench, grab the battery and remove it from the housing. At this point, all that's left to do is insert the replacement and follow the reverse procedure.

Posted on 10 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights in the Renault Kangoo van?
How to replace the rear lights in the Renault Kangoo van?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this tutorial we can see how to replace the rear lights in the Renault Kangoo van, an extremely simple and quick operation. First of all, make sur…
How do you replace the cabin fan of the Renault Kangoo?
How do you replace the cabin fan of the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In order to replace the cabin fan of the Renault Kangoo, you need to loosen the screws that hold all the dashboard panels in place: you should start …
How do you replace the heating radiator of the Renault Kangoo?
How do you replace the heating radiator of the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In order to replace the heating radiator of the Renault Kangoo, you need to completely dismantle the dashboard of the vehicle, first removing the glo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos