Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Safety Test on Commercial Vans: Renault Kangoo Van 2025

Model: Renault Kangoo KFK, MK 3, FFK - Years 2020-2026
Part: Checks and maintenance

Euro NCAP tested the Renault Kangoo Van in 2025, achieving an overall score of 4 stars out of 5. The lane keeping test was deemed effective; the system maintains the lane but only on straight roads or gentle curves. It is still considered "good" for the van category. For cyclist avoidance, the test was conducted with a cyclist crossing from the right or slowly moving in front. The result is "average": it brakes, but at speeds above 40/50 km/h, the impact cannot be completely avoided. Regarding pedestrian avoidance, the result is average/high: good daytime detection, slightly decreasing in low light conditions.

Posted on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on a Renault Kangoo Stepway Van?
How to Reset the Service on a Renault Kangoo Stepway Van?
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) In this tutorial, see how to reset the service on a Renault Kangoo Stepway van, a very simple and quick operation to perform only after completing al…
Where is the fuse box located in the Renault Kangoo 2002?
Where is the fuse box located in the Renault Kangoo 2002?
Renault Kangoo (1997-2008 / MK 1, KC, KW) In the following guide addressed to all of you who own a first-generation Renault Kangoo (year 2002), we will explain where the car's fuse box is loc…
How to activate and deactivate the traction control of the Renault Kangoo
How to activate and deactivate the traction control of the Renault Kangoo
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) Let's see the necessary instructions to activate and deactivate the traction control of the Renault Kangoo; it is recommended to always keep the ESC …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos