Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you take off the steering wheel of the Renault Kangoo 2?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Steering wheel

At first glance, it may seem like a difficult DIY job to do, but in reality it is not, in fact we have proof of this thanks to the video tutorial present here, aimed in general at all cars, including the Renault Kangoo 2. The first thing to do is to remove the cover in the center of the steering wheel, where the manufacturer's emblem is located, then proceed to unscrew the central locking pin, disconnect the electrical cable pins and finally, following the advice of the protagonist of this video, with small taps on the steering wheel itself we reduce the friction on the column and little by little we remove it from its seat.

Posted on 20 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the steering wheel in the Renault Kangoo 1?
How do you remove the steering wheel in the Renault Kangoo 1?
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this short video guide, we will see how to disassemble the steering wheel of the Renault Kangoo 1, in a simple and fast way. On the back of the st…
How to Remove the Steering Wheel Airbag on a Renault Kangoo
How to Remove the Steering Wheel Airbag on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) How do you remove the steering wheel airbag from a Renault Kangoo? Before removing the steering wheel, disconnect the battery terminals located in th…
How to Remove the Ignition Switch from the Renault Kangoo
How to Remove the Ignition Switch from the Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this video tutorial, you can see how to remove the ignition switch from the Renault Kangoo. First, remove the plastic panels located under the ste…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos