Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Electric Window Switch on the Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Window switch

See other generations:
Video tutorial

In this brief video, you will learn how to remove and replace the electric window switch or buttons on the Renault Clio. First, open the front door and start prising the side of the switch panel to detach it from the handle; then disconnect the electrical connector located underneath, as shown in the video.

At this point, install the new window switch panel, connect it, and test its operation before reassembling everything; replace the other window switch in the same manner!


Updated on 1 July 2026 by ScegliAuto


Related tutorials

Where is the inertia switch located in the Renault Clio?
Where is the inertia switch located in the Renault Clio?
Renault Clio (1998-2005 / MK 2, Clio 2) In this video, you can see where the inertia switch is located in the Renault Clio. The inertia switch is a very important device for vehicle safety,…
How to Remove and Replace the Boot Release Switch on the Clio 3
How to Remove and Replace the Boot Release Switch on the Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This article explains how to remove the boot release switch on the Renault Clio 3 for replacement. The procedure is simple and requires a small flath…
How to Remove the Window Switch Button from the Front Door of a Renault Clio
How to Remove the Window Switch Button from the Front Door of a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Before you can start, open the front door of your Renault Clio. Begin by unscrewing and removing the Torx screw that secures the window switch with i…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos