Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How do you replace the cabin filter on the Renault Scenic?

Renault Scenic - Video tutorial

Model: Renault Scenic Scenic III, MK III, Scenic 3, MK 3 - Years 2009-2015
Part: Cabin air filter
Operation: How do you replace the cabin filter on the Renault Scenic?

To be able to replace the cabin filter on the Renault Scenic, you need to go and open the glove box located on the front passenger side, so that you can unscrew the screws inside. Once the screws inside and also the side screws have been loosened, it will be possible to remove the drawer from inside its housing, so that you have access to the components at the rear. Here will be the filter box, which will need to be opened so that the part can be taken out of its housing and replaced with a new one. After the replacement it will be possible to assemble all the components placed inside it.


Posted on 7 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Scenic 2016-2022 - Where is the cabin air filter located in the Renault Scenic 4? Read Answer
    • Scenic 2009-2015 - Where is the cabin filter located in the Renault Scenic? Read Answer
    • Scenic 2016-2022 - Where is the cabin air filter located in the Renault Scenic 4? Read Answer
    • Scenic 2016-2022 - What is the location of the cabin air filter on the Renault Scenic? Read Answer
    • Scenic 2009-2015 - Where is the cabin filter on the Renault Scenic III? Read Answer
    • Scenic 2009-2015 - Where is the cabin filter on the Renault Scenic Xmode? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos