Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio Speakers in a Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Speaker

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the radio speakers in a Renault Clio 4 by following some simple steps: the first thing to do is remove the door panel, so start by removing the screws securing the panel, then pull the panel perpendicularly to the door to remove it. Using a drill, remove the rivets securing the speaker, then use a pry tool to lever out the speaker and disconnect the electrical cable.

It is recommended to use rivets to secure the bracket, as screws may loosen due to vibrations.

Connect the electrical cable (use adapters) and reassemble all parts in reverse order. Do the same with the left speaker.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to Replace the Car Radio Speakers on a Renault Clio 3
How to Replace the Car Radio Speakers on a Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) If you want to change one or more speakers in your Renault Clio 3, first check their dimensions (diameter) and ensure the connectors are suitable for…
How to Replace the Radio in a Renault Clio
How to Replace the Radio in a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Briefly review the instructions to remove and replace the radio and multimedia system in the Renault Clio. First, get inside the vehicle and start by…
How to Remove the Car Radio from a Renault Clio
How to Remove the Car Radio from a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Before you can start, sit in the driver's seat of your Renault Clio. Begin by fully inserting the extraction keys into the holes on the front face of…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos