Do it yourself
Frequently asked questions about cars and motorcycles

Where are the fuse boxes of the Renault Kangoo

Model: Renault Kangoo FW, FC, MK 2 - Years 2007-2021
Part: Fuse box

The Renault Kangoo has two fuse boxes. The first in the passenger compartment, between the steering wheel and the driver's door. In this box there are fuses n. #23 which concerns the rear accessory socket and the n. #25 which instead concerns the front accessory socket. On this box the lid mirrors the meaning of each single fuse, so it is easy to find the one of interest to us. The other box is located in the engine compartment, between the battery and the right side of the bodywork (looking at the car from the front). This is a box with limited access, therefore access is recommended only to Renault personnel.

Posted on 9 February 2023 by ScegliAuto

Video tutorial

Related tutorials

Renault Kangoo (2007-2021 / FW, FC, MK 2) This video shows the location of the fuse boxes in the Renault Kangoo 2 and the corresponding fuse allocation. This video can be useful in case you h…
Renault Kangoo (2007-2021 / FW, FC, MK 2) The fuse box of the Renault Kangoo 2, as shown in the video uploaded here, contains a series of fuses necessary to protect various electrical systems…
Renault Kangoo (1997-2008 / MK 1, KC, KW) In the video posted at the bottom of the following article, the position of the fuse box of the Renault Kangoo 1st series is illustrated. Additionall…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 1997-2008 - Where is the fuse box located in the Renault Kangoo 1.9? Read answer
    • Kangoo 2007-2021 - What is the location of the Renault Kangoo fuse box? Read answer
    • Kangoo 2007-2021 - Where is the cigarette lighter fuse located on Renault Kangoo? Read answer

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos