Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor Brushes of the Renault Megane - Clio

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Starter motor

See other generations:
Video tutorial

In this guide, we will cover the main instructions for dismantling and replacing the starter motor brushes of the Renault Megane 1.4, as well as the Clio. First, remove the starter motor from the vehicle by unscrewing the fixing screws and disconnecting the electrical wiring; then proceed to dismantle the starter motor by unscrewing the nuts of the winding cover, as shown in the video.

Once the magnet is removed, replace the brushes with new ones, checking the wear condition of the windings, following the video until the end!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Renault Megane
How to Replace the Starter Motor on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Today we will go through the instructions that will allow us to remove and replace the starter motor on a Renault Megane. First, let's open the bonne…
How to Replace the Wiper Blades of the Renault Megane?
How to Replace the Wiper Blades of the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) You can replace the wiper blades of the Renault Megane by lifting them so they do not touch the windscreen. Once the wipers are lifted, tilt them rel…
Where is the Starter Motor Located on the Renault Megane?
Where is the Starter Motor Located on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, you can see where the starter motor is located on the Renault Megane, useful in case you need to replace it due to a fault. As shown, …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos