Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlights of the Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Headlight

This guide shows you how to remove and replace the front headlights of the Renault Scenic, following the instructions below. First, open the bonnet of your car and start removing all the plastic clips found at the top; then, unscrew the additional screws located under the bumper and on both sides of the front wheel arches, as shown in the video. At this point, gently remove the front bumper; then, dismantle the headlight units by unscrewing the fixing screws and disconnecting the electrical connectors, following the video tutorial to the end!

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to manually adjust the position of the front headlights of the Renault Scenic 3
How to manually adjust the position of the front headlights of the Renault Scenic 3
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) If you want to manually adjust the position of the front headlights of your third edition Renault Scenic in order to improve visibility in any condit…
How to Replace the Front Headlight Bulbs in a Renault Scenic?
How to Replace the Front Headlight Bulbs in a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this tutorial, you will see how to replace the bulbs of the front headlights in a Renault Scenic, a very simple and quick operation. First, ensure…
How to Adjust the Headlights on the Renault Scenic?
How to Adjust the Headlights on the Renault Scenic?
Renault Scenic (2003-2009 / MK 2, Scenic 2) You can adjust the position of the front headlights on the Renault Scenic by first turning on the instrument panel, inserting the ignition key into t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos