Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Front bumper

In today's instructions, you will learn how to remove and replace the front bumper of the Renault Scenic in simple steps. First, open the vehicle's bonnet and start removing all the clips and screws located at the top and bottom of the front bumper; then unscrew the screws located on both sides of the front wheel arches, as shown in the video. At this point, lever the sides of the bumper to detach and remove it, replacing it with the new one; refit and secure the new front bumper on all sides, following the video to the end!

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Renault Scenic?
How to Remove the Front Bumper on a Renault Scenic?
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) To remove the front bumper on a Renault Scenic, loosen all the screws that secure it to its housing. These screws are located at the top of the bumpe…
How to remove the front bumper on a Renault Scenic?
How to remove the front bumper on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To remove the front bumper on a Renault Scenic, first loosen the bolts located at the bottom of the bumper. Next, loosen all those found inside the w…
How to Remove the Front Bumper of the Renault Scenic
How to Remove the Front Bumper of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today, in this brief and simple guide, see the instructions on how to remove and replace the front bumper of the Renault Scenic. First, open the bonn…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos