Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Front bumper

See other generations:
Video tutorial

Today, with the help of this short video tutorial, we will explain how to remove the front bumper of the Renault Scenic 3. The first step is to open the bonnet, and after lifting the car and securing it, we can proceed with the removal. Start by removing the fixing rivets located at the top of the bumper, then continue by removing the rivets located on the side.

Finally, remove the rivets located at the bottom. All that remains is to detach it from its seat by applying some force.

To remove the rivets, you will need to use a flat-head screwdriver.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to remove and replace the exterior rearview mirror of the Renault Scenic.
How to remove and replace the exterior rearview mirror of the Renault Scenic.
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) Briefly, we will see the instructions on how to dismantle and replace the external rearview mirror of the Renault Scenic. First, let's open the front…
Replacement of the front headlight of the Renault Scenic
Replacement of the front headlight of the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Below we will see the instructions that will allow us to disassemble and replace the front headlight of the Renault Scenic. First, we open the hood o…
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos