Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Rear Seat on Renault Scenic

Model: Renault Scenic Scenic IV, Scenic 4, MK IV, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Seat

See other generations:
Video tutorial

Here's how to reinstall the modular rear seat after removing it, typically to increase boot capacity. Open one of the rear doors, take the seat and bring it close to the anchoring rails on the floor.

Align the front brackets of the seat with the arrows or indicators on the plastic guide. Push the seat towards these anchors until you hear and see it lock into position.

Once secured at the front, lower the back part of the seat (the part that usually rests on the floor). Pull the seat slightly to ensure it is securely fixed and does not move, then check the locking lever of the backrest and ensure it is stable, and that the seatbelts are secured in their correct position.


Posted on 18 March 2026 by ScegliAuto


Related tutorials

How to recline the rear seat of the Renault Scenic
How to recline the rear seat of the Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) Today we will explain how to recline the rear seat of the Renault Scenic. To perform this simple maneuver on the seat, we must open the rear door and…
How to Remove the Left Front Seat of a Renault Scenic
How to Remove the Left Front Seat of a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Before you begin, open the left front door of your Renault Scenic. Move the front seat along its rails, then sit in the back seat. Next, remove the r…
Removing the Rear Seats on a Renault Scenic
Removing the Rear Seats on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's see how to remove the rear seats from a Renault Scenic. In this guide, we will lower and remove the rear seats to create space in the boot. Mov…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos