Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Rear Camera on the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019

Follow this guide for instructions to install the rear camera on the Renault Clio in simple and quick steps. First, open the boot and prepare the camera next to the number plate lights. Then, remove the side pillars of the boot to route the electrical cables to the central display, as shown in the video. Once the camera is securely fixed and the wiring is connected to the display, check its operation by following the video tutorial to the end!

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you install the rearview camera in the Renault Clio 4?
How do you install the rearview camera in the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The demonstrative video available to watch here was shot with a Renault Zoe, but given the technical and structural characteristics, it can easily be…
How to Install a Reverse Camera on a Renault Clio 4
How to Install a Reverse Camera on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This brief video guide shows the necessary steps to install a reverse camera kit on a fourth-generation Renault Clio, produced from 2012 to 2019. Thi…
Guide to installing the rear camera of the Renault Clio
Guide to installing the rear camera of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today's guide and information will show us how to install the rear camera for parking maneuvers on the Renault Clio. First, we get on board the car a…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos