|
Do it yourself
| |||
| ||||
How to Install Courtesy Lights on the Renault Clio IV
Model: Renault Clio
Clio IV, MK 4, Clio 4
- Years 2012-2019
In this video, see how to address Renault's oversight of not including any light in the rear of the Clio IV's cabin: our YouTuber recommends purchasing these LED strips on Amazon, code B08DRLRDVK, priced at £6.99 for the pair, with free delivery for Prime customers. Now, let's move on to the installation: free the cable from the sheath so you can direct it towards the roof of the vehicle, remove the adhesive located at the back of the LED strip (we will attach it differently using Velcro, and to ensure better adhesion, we can use black silicone). Now, remove the ceiling light using plastic spatulas, and separate the area of the switches and lights. Solder the two wires directly there, sanding a free area for better solder adhesion and adding two connectors (female for positive and male for negative) with heat shrink tubing. Using a cable pass-through probe, run a red and black ribbon with a fabric sheath for smoother movement, bringing it to the rear door. Let it exit by lowering the seal. Connect the negative and positive to the LED panel and insert the cable, adhering the LED to the Velcro. Repeat on the other side.
Updated on 10 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
To remove the cabin fan on a Renault Clio, open the glove compartment on the passenger side. This will allow you to loosen the bolts inside the compa…
Renault Clio
(1998-2005 /
Clio 2, MK 2)
Today we will explain how to replace the bulb of the air control panel of the Renault Clio model 2. To perform the replacement of the bulb, we must f…
Renault Clio
(1990-1998 /
Clio 1, MK 1)
In this brief guide, we will go through the steps on how to remove and replace the cabin fan in the Renault Clio. First, open the car's bonnet and st…
Other guides you may be interested in |
Frequently Asked QuestionsHow to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.348
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |