Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Cleaning the EGR Valve

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: EGR valve

See other generations:
Video tutorial

The EGR valve is located under the airbox, so you need to remove it by lifting it and disconnecting the intake hose. The valve is in the indicated position.

To remove it, disconnect the wires and unscrew the 10mm nuts securing it. To extract it, gently tap it with a wooden wedge. Shake and pull to detach it. The valve in the video is quite dirty.

Clean it with petrol or carburettor cleaner and do the same with its seat. If necessary, the valve can be replaced.

Refit it and reconnect the wires. At this point, you can reassemble everything else.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Dismantling and Cleaning EGR Valve
Dismantling and Cleaning EGR Valve
Renault Clio (1998-2005 / MK 2, Clio 2) The EGR valve functions to reintroduce some exhaust gases back into the combustion cycle to lower temperature and reduce NOx emissions: as it is expo…
How to Clean the EGR Valve on a Renault Clio
How to Clean the EGR Valve on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) How to remove the EGR valve on a Renault Clio? Lift the bonnet and secure it; using a screwdriver, unscrew the locking pins of the ventilation pipe a…
How to Clean the EGR Valve on a Renault Clio III 1.5 dCi
How to Clean the EGR Valve on a Renault Clio III 1.5 dCi
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The EGR valve on the Clio III 1.5 dCi tends to clog with carbon, causing a loss of power and engine warning light. To clean it, remove the intake man…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos