Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on a Renault Clio 2

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Oil filter

In this video tutorial, you can see how to replace the oil filter on a Renault Clio 2 by following some simple steps: the first thing to do is to purchase a new oil filter from an auto parts dealer (original part). Get in the vehicle, turn off the car, and pull the handbrake. Lift the car using a hydraulic jack and place safety stands. Lubricate the seal of the new filter with clean oil. Remove the old oil filter and replace it with the new one (for tightening, turn to the right by 3/4); continue turning until you feel increased resistance on the seal. Continue tightening with a strap wrench, without overtightening the filter: (see the illustrative video for correctly tightening the filter).

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Engine Oil and Oil Filter on a Renault Clio
How to Replace Engine Oil and Oil Filter on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Today, you will learn how to replace the engine oil and oil filter on your Renault Clio. First, remove the oil filler cap to avoid creating a vacuum …
How to Replace Engine Oil and Oil Filter on a Renault Clio
How to Replace Engine Oil and Oil Filter on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) In this brief video, you will learn how to replace the engine oil and oil filter on your Renault Clio (second series). It is not a complex task; just…
How to Replace the Engine Oil and Oil Filter on a Renault Clio
How to Replace the Engine Oil and Oil Filter on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the engine oil and oil filter on a Renault Clio, lift the car using axle stands. This will allow access to the underside of the vehicle to…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos