Do it yourself
Frequently asked questions about cars and motorcycles

Reset the Oil Light on a Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

In this guide, see how to reset the maintenance light, which indicates the remaining oil life, on your Renault Megane third series, produced from 2008 to 2015. Start by inserting the ignition key to turn on the vehicle's injection without starting the engine.

Next, press the up arrow button located at the end of the lever until you reach the maintenance interval option on the speedometer display.

Then, keep the up arrow button pressed to enter it. After this, press and hold the up arrow button on the maintenance option to perform the reset.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) Today we will explain how to reset the service light on a Renault Megane model 3. Turn on the instrument panel and press the upper arrow button repea…
Renault Megane (2002-2010 / Megane 2) Today we will explain how to reset the service light on a Renault Megane vehicle. To reset the light, we need to turn on the instrument panel and pre…
Renault Megane (2008-2015 / Megane III, Megane 3) Today we discover the reset operation of the service light for the regular maintenance of the engine oil change of the Renault Megane, in simple step…

    Frequently Asked Questions

    • Megane 2008-2015 - How do you reset the Renault Megane Service warning light? Read answer
    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos