Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to transform an anonymous dashboard of a Renault Megane III into something unique

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Dashboard
Operation: How to transform an anonymous dashboard of a Renault Megane III into something unique

If the dashboard of your Renault Megane starts to wear out a bit, then you need to follow the instructions in this video. First, get a set of plastic spatulas to remove the components from their housing; you can find as many as you want on Amazon, for example, with the code B0BL37DGTP you can find the 4-piece kit for 4.99 euros, including delivery costs. As for the carbon film, both matte and glossy, it costs 19.99 euros per meter (also on Amazon). We are talking about the wrapping film, the adhesive one costs a little less. Remove all the parts you want to wrap, then with a lot of patience and attention, get to work. It is a job that gives a lot of satisfaction but requires patience. When you finish, the car will no longer be the same, and you can proudly say that you did it yourself.


Posted on 15 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Megane 2008-2015 - What warning lights are on the dashboard of the Renault Megane? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos