Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Renault Kangoo?

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Service warning light

To reset the Service light on the Renault Kangoo, turn on the instrument panel by rotating the key in the ignition switch: once it is on, press and hold the button located on the side of the instrument panel. This will cause the Service light to start flashing, and you can continue to hold the button; this will reset the light, allowing you to release the button. You can check that the reset has occurred by turning the instrument panel off and on again.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Renault Kangoo?
How do you reset the Service light on the Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) It will be possible to reset the Service light shown on the instrument panel of the Renault Kangoo by pressing and holding the button located on the …
How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To reset the Service light on the Renault Kangoo, insert the ignition key into the ignition switch so that you can turn it to power on the instrument…
How to Reset the Service Light on a Renault Kangoo?
How to Reset the Service Light on a Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) To reset the Service light on the Renault Kangoo, insert the key to turn on the instrument panel. Once this is on, an icon of a spanner with the numb…

    Frequently Asked Questions

    • Kangoo 2007-2021 - Why does the Renault Kangoo service light come on? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos