Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find the Fuse Box on a Renault Clio 4

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Fuse box

If you want to easily and independently locate the fuse box containing all the fuses for your Renault Clio Mk4 (2012-2019), read this guide and follow the steps described. First, get into the driver's seat and ensure that the car is completely off. Next, locate the small compartment under the steering wheel and remove it with your hands to gain access to the fuses you are looking for. Before working on them in case of electrical faults, disconnect the car battery.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The fuses on a Renault Clio are divided between two fuse boxes installed in the vehicle: in this car model, you can find two boxes. The first is loca…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) All the fuses of the Renault Clio are located within dedicated fuse boxes installed in the vehicle: in this model, you can find two boxes that contai…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The Renault Clio mk4 contains a relay box. The relay box is located under the bonnet, specifically near the battery. Inside the relay box, there are …

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos