Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to change the system language of the Renault Megane 4

Renault Megane - Video tutorial

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: -board computer
Operation: How to change the system language of the Renault Megane 4

Changing the system language used on your Renault Megane Mk4 is really very simple and thanks to the instructions in this new guide, you will be able to complete the operation without any problems. First of all, go inside your Renault Megane and start both the instrument panel and the infotainment system. At this point, use the latter and enter the vehicle settings. Then click on the icon related to the system language and scroll through the list. Finally, select your preferred language and you are done.


Posted on 27 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Megane 2002-2010 - What does it mean that the card 78207 does not open the doors on the Megane 2? Read Answer
    • Megane 2008-2015 - Why doesn't the Renault Megane multimedia system recognize the map? Read Answer
    • Megane 2015-2023 - What does the Renault Megane P2263 trouble code mean? Read Answer
    • Megane 2008-2015 - What does the error code DF017 mean on the Renault Megane 2? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos