Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the mirror control switch of the Renault Clio 4.

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Side mirror

If the command that regulates the external rearview mirrors of the Renault Clio were to break and no longer perform its function, we must proceed with its replacement. Let's get a replacement by accessing the wide online offer, always checking for perfect compatibility. Using a lever, preferably in plastic to avoid scratching the surfaces, we remove the old command, disconnect the electrical connector and remove it. Take the new switch, insert the connector, turn the key to the on position and check that everything works correctly before inserting the block into its seat.

Posted on 10 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Electric Window Switch on the Renault Clio
Guide to Replacing the Electric Window Switch on the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) In this brief video, you will learn how to remove and replace the electric window switch or buttons on the Renault Clio. First, open the front door a…
Where is the inertia switch located in the Renault Clio?
Where is the inertia switch located in the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) In this video, you can see where the inertia switch is located in the Renault Clio. The inertia switch is a very important device for vehicle safety,…
How to Remove the Window Switch Button from the Front Door of a Renault Clio
How to Remove the Window Switch Button from the Front Door of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before you can start, open the front door of your Renault Clio. Begin by unscrewing and removing the Torx screw that secures the window switch with i…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos