Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the coolant level on the Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years 2005-2013
Part: Antifreeze coolant

In this video, we see how to check the coolant level of a Renault Clio: first, the vehicle must be turned off and cold, and it must be on a flat surface. We open the hood by placing the support rod and check the coolant level, which should be close to the "max" mark without ever exceeding it. If necessary, we top it up. It is important that the coolant is the same as that in the reservoir, otherwise the mixture could cause unwanted chemical reactions. We close the cap tightly and close the hood; the check is complete.

Posted on 9 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the thermostat of the Renault Clio
How to change the thermostat of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this short and simple guide, we will see the process of disassembling and replacing the thermostat of the engine cooling liquid of the Renault Cli…
How to check and top up the oil level in a Renault Clio
How to check and top up the oil level in a Renault Clio
Renault Clio (2019-2026 / Clio 5, Clio V) In this video tutorial, the correct procedure for checking the oil level and performing an oil top-up is shown. The procedure for performing an oil t…
Replace the coolant reservoir on Renault Clio
Replace the coolant reservoir on Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Does the coolant reservoir need to be replaced? Let's see how the Renault Clio pan is removed. We lift the front hood of the car, we identify the rad…

    Frequently Asked Questions

    • Clio 2012-2019 - How much coolant is in the Renault Clio? Read answer

How to Remove the Fuel Pump from a Hyundai IX35

How to remove the fuel pump from a Hyundai IX35. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; that is what you need to dismantle. Undo the screws of the metal cap and remove it. Wrap the entire perimeter of the metal sheet with absorbent paper or cloth, then, with a screwdriver, undo the large bolt around the pump (if present for the model). Disconnect the power connectors and the liquid circulation pipes. Finally, extract the floating fuel pump. To perform the assembly, work in reverse order.

Watch the video!


by ScegliAuto

More videos