Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : How to disassemble the fuel pump on Hyundai IX35

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Fuel pump
Operation: How to disassemble the fuel pump on Hyundai IX35

How to disassemble the fuel pump on Hyundai IX35. To begin we disconnect the battery cables, then, we remove the rear seat seat from the car. We will find various wirings and a metal piece with screws, here, that's exactly what we need to disassemble. We unscrew the fastening screws of the metal cap and remove it away. We wrap the entire perimeter of the sheet with absorbent paper or cloth, then, with a screwdriver, unscrew the large bolt placed around the pump (if present for the model). Disconnect the power supply terminals and the liquid circulation tubes. Finally we take out the floating fuel pump. To carry out the assembly we continue backwards.


Posted on 19 October 2023 by ScegliAuto



How to disassemble the fuel pump on Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) .. How to disassemble the fuel pump on Hyundai Ix35? To begin, we disconnect the battery cables, then, we..
Replacing the outside rearview mirror on Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To extract and subsequently replace the exterior rearview mirror on Hyundai Ix35 you simply have to pry it from behind with your hands, making it com
How to navigate the speedometer of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this video we can see, with the help of the youtuber, how to navigate the display of the speedometer of the Hyundai IX35, and what information we

Other guides that may interest you

    Frequently Asked Questions

    • Ix35 2009-2015 - Where is the fuel pump of the Hyundai IX35? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos