Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : How to replace the diesel filter on Hyundai Ix35 - Kia Sportage 1.7 CRDI

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Diesel filter
Operation: How to replace the diesel filter on Hyundai Ix35 - Kia Sportage 1.7 CRDI

In this video tutorial we will see how to remove and replace the diesel filter on the Hyundai Ix35 1-7 CRDI, but also on the Kia Sportage with the same engine. First of all we open the bonnet of our car and start with the disassembly of the battery; then we also remove the battery holder and disconnect the electrical connectors that we find below, as shown in the video. At this point we disconnect the diesel pipes that reach the filter and unscrew the fixing screws of the bracket, using a 10 mm socket wrench; apply the reverse procedure for reassembly!


Posted on 21 February 2024 by ScegliAuto



Replacing the diesel filter on the Hyundai IX 35 - Kia Sportage 1.7 CRDI
Hyundai ix35 (2009-2015 / MK 1) In this video tutorial we will see how to remove and replace the diesel filter on the Hyundai IX 35, but also on the Kia Sportage with 1.7 CRDI engin
How to replace the diesel filter on the Hyundai Ix35 (same as the Kia Sportage)
Hyundai ix35 (2009-2015 / MK 1) To replace the diesel filter and the air filter of the Hyundai Ix35 (same procedure for the Kia Sportage) we proceed as follows: we start by removing
How to replace the air filter on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Before starting, we will have to open the front hood of our Hyundai IX35. So let's start by unhooking and moving the clips that secure the top cover

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos