Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service indicator on the Renault Fluence

Model: Renault Fluence MK 1 - Years 2009-2019
Part: Service warning light

In this video, we are shown how to reset the maintenance light on the Renault Fluence. The procedure is simple, takes little time to be carried out, and does not require tools or software. To reset the maintenance light, you need to insert the card, press the start button without pressing the brake, in order to only start the instrument panel. Once the instrument panel is started, using the down arrow button on the lever to the right of the steering wheel, scroll through the menu until you find the option to perform maintenance. Once you reach this option, press and hold the down arrow button for about 10 seconds until the light is reset.

Posted on 21 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2011 Renault Fluence?
How to Reset the Service Light on the 2011 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) To reset the service light on the 2011 Renault Fluence, use the arrow buttons located at the end of the lever on the right side of the steering wheel…
Where is the OBD port located on the 2015 Renault Fluence?
Where is the OBD port located on the 2015 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) If you have not been able to locate the OBD port inside your 2015 Renault Fluence, don't worry because in the following guide we will explain where i…
How to reset the service light on a Renault Fluence?
How to reset the service light on a Renault Fluence?
Renault Fluence (2009-2019 / MK 1) In this tutorial, you will learn how to reset the service light on a Renault Fluence, a very simple and quick operation to perform only after complet…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos