Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering wheel in the Renault Fluence?

Model: Renault Fluence MK 1 - Years 2009-2019
Part: Steering wheel

In this tutorial we can see how to disassemble the steering wheel in the Renault Fluence, a very simple and quick operation. Before proceeding, disconnect the negative terminal of the battery to avoid accidental activation of the airbag. Start by going inside the cabin, then rotate the steering wheel 90 degrees, locate the hole on the back of the steering wheel and, using a screwdriver, unlock the clip accessible from the inside to release the airbag. Disconnect the connector, unscrew the central bolt with a 19mm socket wrench and separate the steering wheel from the steering column.

Posted on 25 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2011 Renault Fluence?
How to Reset the Service Light on the 2011 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) To reset the service light on the 2011 Renault Fluence, use the arrow buttons located at the end of the lever on the right side of the steering wheel…
How to disassemble the external rearview mirror of the Renault Fluence
How to disassemble the external rearview mirror of the Renault Fluence
Renault Fluence (2009-2019 / MK 1) If you own a Renault Fluence and want to learn how to properly remove the external rearview mirror, all you have to do is read the following guide ca…
How to disassemble the storage compartment in the Renault Fluence?
How to disassemble the storage compartment in the Renault Fluence?
Renault Fluence (2009-2019 / MK 1) In this tutorial we can see how to disassemble the storage compartment in the Renault Fluence, an extremely simple and quick operation. First of all,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos