|
Do it yourself
| |||
| ||||
How to Replace the Cabin Air Filter on the Renault Laguna
Model: Renault Laguna
MK III, Laguna 3, MK 3, Laguna III, X91
- Years 2007-2015
First, locate the filter, which is positioned at the back of the glove compartment in front of the front passenger seat. Open the flap and remove the screws indicated in the video. You will then need to release the clips that secure the entire glove compartment. Once fully extracted, you can unscrew the bolts holding the air filter cover, then remove it and replace it, taking care to note the orientation for reassembly. Follow the instructions on the filter's packaging and proceed by retracing the steps for reassembly.
Updated on 24 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Laguna
(2007-2015 /
MK III, Laguna 3, MK 3, Laguna III, X91)
Today we will explain how to replace the cabin air filter of the Renault Laguna 3. We start by removing the side panel of the passenger side dashboar…
Renault Laguna
(2001-2007 /
Laguna 2, MK 2, X74)
How do you replace the pollen filter on a Renault Laguna? This guide shows you how to remove it: lift the bonnet, then unscrew the securing screws of…
Renault Laguna
(2007-2015 /
MK III, Laguna 3, MK 3, Laguna III, X91)
Today we will explain how to replace the air filter on a Renault Laguna 3 car by yourself. The air filter replacement should be done at least once a …
Other guides you may be interested in
|
Tips on How to Change the Glow Plugs on 1.3 MJT Engines
The 1.3 CDTI engine is used in many models from Fiat, Lancia, Opel, and Suzuki, making glow plug wear a common issue. The glow plugs are located at the front of the engine, just in front of the rocker cover. Simply remove the engine cover to locate them. A quick functionality check can be done by disconnecting the connector and gently touching the glow plug with an electric wire connected to the positive terminal of the battery: if a spark occurs, the glow plug is fine. A problem that may arise during replacement is that the glow plug may not unscrew. It is advisable to spray some penetrating oil and let it sit overnight before unscrewing it with an 8 mm socket. Before installing the new one, apply some special grease and do not exceed the torque specification. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.114
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |