Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Air Vents

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Air vents

See other generations:
Video tutorial

Let's see how to remove the air vents (center dashboard) from an Audi A6. Use multiple levers (screwdriver) to remove the vents. Pry at the top and bottom with the levers (as shown in the video) until you release the clips inside; detach the air vents and pull them out from the dashboard.

Once you have pulled the vents outward, disconnect the two power connectors (as shown in the video) and remove the piece. Prepare to perform maintenance inside the dashboard, and then start installing the new air vents; connect the terminals and secure everything.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Audi A6 (2011-2018 / C7, MK 4) Before you can start, sit in the driver's seat of your Audi A6. Begin by inserting two thin but sturdy tools into the gap between the air vents. Then…
Audi A6 (1997-2004 / MK 2, C5) In this guide, you will learn how to remove and replace the air vents of the Audi A6, including the Allroad version. First, get inside the vehicle an…
Audi A6 (2004-2012 / C6, MK 3) The climate control controls are located in the center of the console, just below the air vents, and are snap-fitted to the dashboard, so there are n…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos