Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Dashboard Trim on the Audi A6 C6

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Dashboard

In today's tutorial video, you will see the instructions needed to remove the dashboard trim or cover on the Audi A6 C6, third generation. First, get inside the vehicle and start by removing the air vents, disconnecting the electrical connector found at the back. Then, remove the cruise control buttons as shown in the video. At this point, unclip and remove the turn signal stalk and the instrument cluster, disconnecting the connectors at the back. Finally, remove the dashboard trim by following the tutorial video to the end!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Outer Handle of an Audi A6
Remove the Outer Handle of an Audi A6
Audi A6 (1997-2004 / MK 2, C5) Remove the outer handle from inside the door of an Audi A6? Here’s how to take it apart. Remove the cover panel to access the outer handle. Once the …
Disassembly of the dashboard of the Audi A6
Disassembly of the dashboard of the Audi A6
Audi A6 (2004-2012 / MK 3, C6) Today's video will show us the main instructions on how to disassemble and remove the entire dashboard of the Audi A6. First, we get into the car and…
Where is the fuse box located in the cabin of the Audi A6 C6?
Where is the fuse box located in the cabin of the Audi A6 C6?
Audi A6 (2004-2012 / MK 3, C6) If you want to be able to locate the small fuse box inside the cabin of your Audi A6 C6, just follow all the steps described in this new mini guide d…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos