Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Dashboard on Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Dashboard

Let's see how to remove the instrument cluster on the Audi A6. Follow the various steps illustrated in the video carefully. Use metal trim tools or a flathead screwdriver to detach the instrument panel. Remove the radio control panel by pulling it towards you as shown in the video, then unscrew the ventilation control panel with the screwdriver and take it out. Disconnect the ventilation grilles from the dashboard by unscrewing the securing screws, then extract the instrument cluster from the dashboard, being careful with the various wiring (disconnect the power connectors and the antenna cable).

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster on Audi A6
How to Remove the Instrument Cluster on Audi A6
Audi A6 (2004-2012 / MK 3, C6) How to remove the instrument cluster on Audi A6? Let's carefully see in this video how to perform the disassembly by following the guidelines. Use or…
How to Remove the Radio Screen of an Audi A6
How to Remove the Radio Screen of an Audi A6
Audi A6 (2011-2018 / C7, MK 4) Before you begin, sit in the driver's seat of your Audi A6. Start by prying and removing the trim around the radio screen using a thin but sturdy too…
How to Remove the Air Vents from an Audi A6
How to Remove the Air Vents from an Audi A6
Audi A6 (1997-2004 / MK 2, C5) In this guide, you will learn how to remove and replace the air vents of the Audi A6, including the Allroad version. First, get inside the vehicle an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos