Do it yourself
| ||||
|
Audi A6 - Video tutorial
Model: Audi A6
C7, MK 4
- Years 2011-2018 Removing the air vents of an Audi A6 version MK 4 (also called C7) is not as simple as it seems, because, having been built with true Teutonic care, it is also difficult to disassemble. In fact, before removing the four clips which hold the vent in place - and which in any case must be removed carefully, but also with a certain firmness, being rather rigid - you will have to remove the aluminum finish. This must be removed with the utmost care and with a plastic spatula, in order not to run the risk of scratching it and then ruining it forever. Then underneath, you will find a second plastic frame that acts as a real safety hinge. Only then can you carefully remove the four clips.
Posted on 11 April 2023 by ScegliAuto
Other guides that may interest you |
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |