Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuses on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

Do you need to replace the fuses located in the dedicated box on a Fiat Grande Punto? Open the cover and enter the vehicle, remove the trim in the glove compartment (located on the dashboard under the steering wheel) using a plastic lever, then remove the drawer.

Use needle-nose pliers to pull out the damaged fuses in the compartment.

Once this is done, insert the new fuses into the designated slots in the compartment. Close the fuse inspection box with the cover.

Finally, test the correct operation of the vehicle by turning on the instrument cluster with the appropriate key.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below are the main instructions for locating the fuse boxes of the Fiat Grande Punto, as well as the Punto Evo. First, locate the internal fuse box, …
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This video illustrates where the cigarette lighter fuse is positioned in a Fiat Grande Punto. This operation may be necessary in case of a malfunctio…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If you need to replace a damaged fuse in your Fiat Grande Punto, refer to this video to locate the fuse box and, if necessary, replace them using the…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos