Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Tail light

Removing the rear light of the Renault Kangoo from its housing is a very simple operation, achievable in a few minutes thanks to the support of our video tutorial. The first thing to do is to open the rear doors of the van and enter inside. The second thing to do is to remove with the help of a Phillips screwdriver the three plastic clips or screws that hold the light to the bodywork. Once the screws are removed, you can disconnect the three connectors and remove the light in its entirety. Once the necessary maintenance has been carried out, you can reinsert the light in the same way you removed it.

Posted on 27 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear fog light on a Renault Kangoo?
How do you replace the rear fog light on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) It will be possible to replace the rear fog light of the Renault Kangoo by opening the rear hatch, allowing the screws that secure the headlight asse…
Replacement of the rear fog light bulb of the Renault Kangoo
Replacement of the rear fog light bulb of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) The following steps will show us how to disassemble and replace the rear fog light bulb of the Renault Kangoo. First, let's move to the rear of the v…
How to Replace the Rear Light Bulbs on a Renault Kangoo
How to Replace the Rear Light Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Below are the instructions that will allow you to remove and replace the rear light bulbs on a Renault Kangoo. First, open the rear doors of the vehi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos