Do it yourself
Frequently asked questions about cars and motorcycles

Overview of Fuses in a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

In this very useful tutorial video today, see the position, name, and operating amperage of each fuse and relay inside a Renault Clio, third generation model produced from 2005 to 2013. The first fuse box is located to the left of the steering wheel behind a cover that needs to be removed, and behind the cover, you can find an overview of the fuses.

The second fuse box can be found in the engine compartment in front of the battery on the right, accessible by removing its cover with a Torx T25 spanner.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The attached video shows the complete fuse diagram for our Renault Clio. The fuses protect the electrical components of our van from short circuits a…
Renault Clio (2019-2026 / Clio V, Clio 5) Today’s information will help you locate the positioning and layout of the internal fuses for the Renault Clio. First, open the driver’s side front p…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this guide we will see the layout and positioning of the fuse boxes of the Renault Clio. First of all, we open the hood of the car and start remov…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What is the location of the wiper fuse on the Renault Clio? Read answer
    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos